GN1200 20" - Smartcord Straight, QD to Mod 88001-99

Overview

The GN 1200 cord is the solution to a common problem of not being able to connect headset and telephone. Even though most things have been standardized, the cord connecting the phone with the handset or headset is anything but standard as each telephone manufacturer has its own wiring code. Now, with the universal “smart” cord, GN 1200, the cord will work with virtually any phone providing greater convenience.

• Works with most desk phones including IP hard phones
• Microphone amplification to boost transmit levels when connecting to low transmit volume phone systems
• Simple slide adjustment for easy setup

When hooking up a new headset there is not always a dial tone. The problem could be the headset or the telephone? But chances are it is the cord. Even though the headset and telephone may be plug compatible, the wiring is determined by the individual telephone manufacturer.

GN 1200 features eight separate wire schemes – including three with built-in microphone amplification. Just connect the GN 1200 and headset through the Quick Disconnect plug and flick the slider from one position to the next until a dial tone is heard. It’s as simple as that!

The GN 1200 fits virtually all telephones featuring a standard RJ 9 modular connector.

Features

• Simple 8-position slide adjustment: No need for a user manual; simply slide until a dial tone is heard
• Standard RJ9 connector: Connects to virtually all telephones using a standard modular plug
• Standard GN Quick Disconnect plug to headset: Works with any GN headset equipped with Quick Disconnect
• Straight 80 cm / 31.5 inch cord or lightweight coiled cord: Longer than many standard cords, yet at a competitive price
• Built-in low-current microphone amplifier: Enables perfect operation with telephones that require extra signal gain such as Cisco, Panasonic, Nortel, and Avaya, plus many IP telephones

*Available in both straight and coiled versions.